View Single Post
Old 10-07-2007, 03:17 PM   #14
ruredy
Born Wild
 
ruredy's Avatar
 
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
Default Re: Removing an EZGO clutch

The threads are not reversed, right-tight, left-loose. The bolt your trying to get out is around 6" long and threads into the crank, oil is probably not going to reach the threads to help. Most people who work on these use impacts to install that bolt, sometimes its near impossible to remove the clutch without one.
ruredy is offline