Re: Attempting to convert CFMoto gas UTV to electric.
So as an update.
I am ditching the worm gear drive idea. My plan is to pull the bevel gear/driveshaft assy out of the house. I will use that to retain the 4wd setup.
I will likely ditch the bevel gear and install a Sprocket type gear to that shaft. I'm likely just going to make this thin chain drive which will allow me to change gear ratios so much easier.
There is a small possibility that i will retain the bevel gear and get a pinion gear to mate with it. The current pinion is too large to help with the ratio.
|