Thread: G19 won't move
View Single Post
Old 10-17-2020, 07:15 PM   #6
otis30223
Not Yet Wild
 
Join Date: Feb 2020
Posts: 12
Default Re: G19 won't move

Yes that's same schematic I used when creating the pinout chart. I have listed each pin with wire color, source of voltage and what reading I expect to find when back probing the connector. The only one I was unsure of is what reading I should see on the throttle position sensor. On a automobile the reference voltage is 5V and varies between .45V(idle) and 4.8V(full throttle) depending on the model.
otis30223 is offline   Reply With Quote