View Single Post
Old 02-09-2017, 02:29 PM   #7
Molon Labe USA
Getting Wild
 
Join Date: Dec 2016
Location: Ellis Co., TEXAS
Posts: 91
Default Re: Factory Location for Viltage Reducer (G29)

I went to install this & thought I had it all figured out, but I don't. Coming off the key switch is 2 wires, red w/yellow stripe & red w/white stripe. The red w/yellow is on the side of the switch that is "ON". I want to tap into this wire near the battery pack, as opposed to running it all the way to the switch. I found a red w/yellow stripe wire that plugs into the RUN/TOW switch under the seat. Is this the same red/yellow wire from the key switch?
I ask because there is also a red w/yellow stripe coming off the FWD/REV switch up front as well (unless the key switch & the FWD/REV red w/yellow are one in the same).
I searched google for a wiring diagram for a G29 but came up w/nothing. Thanks!!!


Just found this link that has all Yammy wiring diagrams.
http://www.courtesygolfcars.com/yamaha-schematics
According to the one for the YDRE, am I correct in assuming the red w/yellow (RY) is all the same throughout the cart AND it's the one I need to connect the key switch wire from my volt. reducer to???
I plan on tapping into it @ the TOW/RUN switch.
Molon Labe USA is offline   Reply With Quote