View Single Post
Old 01-25-2020, 02:04 PM   #7
Blind Old Coot
Getting Wild
 
Blind Old Coot's Avatar
E-Z-GO
 
Join Date: Jul 2016
Location: Hampshire , Illinois
Posts: 90
Default Re: Oil pump cover and o ring.....

A mechanical gauge would work better than guessing at a light.... Would the gauge work with a hose to the kick plate next to the choke lever or all the way to the dash because of the distance? Very doable... Maybe a zero to 100 psi gauge...I'll look for one.

Looking at the motor, I can install it right by the motor without a hose....with a piece of brass pipe extension...

The gears were installed as they came out because I labeled and taped everything as it came out. (Picture wife wondering where all her zip lock bags went....).

The oil pump cover is $14 at EZGO. I'll get some o rings too. Thank you for your offer.

This is so cool that it runs, just a couple of farts but I heard it run....the little ugly duckling made it.

1/8 NPT on the threads for the pressure gauge?
Blind Old Coot is offline   Reply With Quote