Quote:
Originally Posted by Buzzworth
Just straight across from front to back to be sure the connection is made with no power to it. a new switch should be fine, but if the nut in the center isn't tight enough there may not be contact.
If you still have your old one, take it apart and you will see that the brass contacts on the part that turns make contact with the wired terminals on the stationary side.
That was what was wrong on mine. That was what was wrong with mine.
|
Thanks, I checked them last night. I have continuity through all 4.
Based on all my tests I think my problem is controller. I'm going to order one and cross my fingers!
Jason