Thread: Controller bad?
View Single Post
Old 02-13-2020, 04:41 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
Default Re: Controller bad?

This controller probably has 2 throttle wires connected to the controller pins 2 and 3. If you remove these wires the cart still goes? Impossible:
Sounds you might be having some throttle signal issues.
Older conversion signal should read 0-5000 ohms if you remove the above mentioned 2 wires and plug the Meter leads into each one.
Newer conversion has a single throttle wire. read 0-5 volts between this wire and battery main (-)
scottyb is offline   Reply With Quote