Quote:
Originally Posted by Musthang
-snip-
I had both the main red wire and the main yellow wire completely disconnected from the solenoid and just the small blue wire and small blue/white wire connected and the cart still moved forward when pressing the gas pedal.
I’m at a loss, can someone point me in the correct direction?
Thanks,
Jimmy
|
You probably just felt the initial movement form the capacitors discharging.
No reverse, no back up alarm when Rev is selected, hot motor when Rev is selected, and goes in forward when you flip-flopped the directional switch identifies a bad controller FET. Will need to replace the controller. I would replace it with an Alltrax XCT300 for the best bang for your buck over an OEM.