Quote:
Originally Posted by NoleFan4Ever
When you say ignition you are referring to the key switch? If so, place Tow/Run switch into tow, remove the cable as you did and then pull the igniting switch out the dash. Take a picture before you unwire it and then use a blow drier set to "COOL", not hot, set the switch in front of it and let it blow for an hour or more. You need to completely dry it out and if it was anything other than water (soda, beer, tea, etc.) then get you a can of Electri-Clean or Co-Contact cleaner and clean the switch out.
|
Yes referring to the key switch. I will do that first thing in the morning. I was just worrying I may have shorted the controller out. Thanks I'll keep you posted
Sent from my SM-N920V using Tapatalk