View Single Post
Old 01-10-2016, 10:44 AM   #4
mrgolf
Old Sky Soldier
 
mrgolf's Avatar
Club Car
 
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
Default Re: 2006 48V Club Precedent install Madjax Convertor

OK if this were mine I would connect the black wire to the black terminal block located near the obc, and controller. It is connected to the controller neg. cable.
I would connect the yellow to the solenoid cable where the main battery pos. Cable connects on that post.

I would connect the green to the small light blue wire post on the solenoid. It is powered from the key switch.

Red wire is for 12 volt output that you want to turn on off with key switch.

The blue is for things you want to have 12 volts going to all the time like radio memory, etc.
mrgolf is offline   Reply With Quote