Buggies Gone Wild Golf Cart Forum - View Single Post

biphase · 08-13-2019, 07:29 AM

Make all voltage measurements with the black lead attached to B-

The red/yellow wire on the key switch comes directly from the output side of the tow/run switch. When the tow/run switch is in "run" you should have +48V on both sides of the tow/run switch and also on the red/yellow wire at the input side of the key switch.

08-13-2019, 07:29 AM	#8
biphase Gone Wild Join Date: Jan 2009 Location: Ocala, FL Posts: 384	Re: Yamaha G29 controller Make all voltage measurements with the black lead attached to B- The red/yellow wire on the key switch comes directly from the output side of the tow/run switch. When the tow/run switch is in "run" you should have +48V on both sides of the tow/run switch and also on the red/yellow wire at the input side of the key switch.