View Single Post
Old 06-10-2009, 08:13 AM   #6
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 70,695
Default Re: Drive Belt Suggestions

I recently put a 13hp max in a 95 carryall and hit the same problem.... I didn't like the way it fit in there at all. I ended up removing the rubber mounts in front and re-drilling mount holes to move the motor forward and then bolting thru the two pieces. It was the only way I could see to do it. You cannot have less than 1/2 inch clear to that rubber boot over the POSITIVE starter cable to the grounded transaxle...good luck
scottyb is offline   Reply With Quote