Buggies Gone Wild Golf Cart Forum - View Single Post - Help me figure out how voltage reducer is hooked up

Htownblue · 05-11-2019, 08:10 PM

And are you sure there is a reducer? It looks like he wired up the light kit directly to the batteries. Where is the reducer located? The yellow bullet connector ground is connected to the light kit harness it appears.
Here’s how it should be wired- 48V positive from pack into positive INPUT into reducer. 48V input GROUND connected to the BULLET connector headed into the OBC. 12V OUTPUT POSITIVE connected to either a fused bus bar or if you ONLY have a light kit connect it to the blue light kit harness wire. 12V GROUND output from reducer to ground buss bar OR if you only have a light kit to the ground wire from the light kit harness.

05-11-2019, 08:10 PM	#2
Htownblue Gone Wild Join Date: May 2015 Location: Houston Posts: 903	Re: Help me figure out how voltage reducer is hooked up And are you sure there is a reducer? It looks like he wired up the light kit directly to the batteries. Where is the reducer located? The yellow bullet connector ground is connected to the light kit harness it appears. Here’s how it should be wired- 48V positive from pack into positive INPUT into reducer. 48V input GROUND connected to the BULLET connector headed into the OBC. 12V OUTPUT POSITIVE connected to either a fused bus bar or if you ONLY have a light kit connect it to the blue light kit harness wire. 12V GROUND output from reducer to ground buss bar OR if you only have a light kit to the ground wire from the light kit harness.