Quote:
Originally Posted by NCPW
Looking good!
I would go the route of making the red adjustable plate using the 1/2" though bolts.
|
Did a bit of tear down today and realized I cant mount the shock on the outside of the frame. It's actually leaning outward at about 3 degrees.
I found a pretty good article about shock angle.
https://www.google.com/amp/s/www.spe...ng-guide/30078
I'm going to look at building a crossmember and angling the shocks inward at 20-25 degrees.
Hopefully this will help with the stiffness of the shocks too.
Sent from my SM-G935V using Tapatalk