Quote:
Originally Posted by smallblock450sl
Welcome. The stop switch is not adjustable. Is the govenor been been bypassed ? My thought would be to clean the carberator. then adjust accelerator cables. Cable #1 (at the pedal) leave alittle slack (1/4 of play) and cable #2 (at the govenor arm) also leave (1/4 or so) slack. This will alow the starter to turn over, the engine ignition to fire before the throttle shaft is open and giving the engine fuel. Hope this helps. Dave
|
Thanks,i will check that cable adjustment tonight.I am not sure if the governor is bypassed or not,i will also check that.The carburetor was rebuilt with the engine......oh yeah forgot to mention it will back fire at times after letting off the acc pedal,but i am going to also check to make sure my throttle plate is closing all the way.