Thread: 2013 Precedent
View Single Post
Old 03-24-2017, 10:39 AM   #1
Bcpick0
Not Yet Wild
Club Car
 
Join Date: Mar 2017
Location: Lexington, KY
Posts: 51
Default 2013 Precedent

I purchased a heavy duty spring kit for my cart as my new 12" wheels with low profile tires was rubbing on the left rear fender when making a right turn. I installed them in a couple hours and all seemed well. but, i noticed that the cart started leaning to the left after a couple of weeks.

I noticed that the left shackle had "fallen" as you can see on one of the pictures. There is no rubbing but the cart has a noticeable lean. I loosened the bolts, jacked it up and re-tightened to make it stand back up at a 45 degree angle which can also be seen in a picture. This brought the cart back leve.

after sitting on it and a short ride, it quickly went back flat.

I sent a pic to the local CC dealer and he said it looks like the spring is too long. I sent the pic to the co that sold the springs and they said my shackles were not correct. I have no idea who to believe. It does seem that the shackles on the 13 precedents are not what is on my cart. i attached a pic of the shackle that should be on my cart. I could buy those shackles and put them on this cart but it seems that the narrow end would be too narrow to fit inside the stainless frame.

Just looking for some advice!!
Attached Images
File Type: jpg IMG_20170324_083817194.jpg (197.3 KB, 0 views)
File Type: jpg IMG_20170323_165822970.jpg (190.0 KB, 0 views)
File Type: jpg IMG_20170323_165832768.jpg (200.5 KB, 0 views)
File Type: jpg 851225.jpg (33.5 KB, 0 views)
Bcpick0 is offline   Reply With Quote