View Single Post
Old 10-10-2011, 09:29 PM   #7
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
Default Re: Alltrax 400 USB to RS232 Cable

Quote:
Originally Posted by ezgokid View Post
They shouldn't have sold you a serial cable for that much.

You can get a cheap one for MUCH less, especially for one time use. Make sure you get one with some sort of driver, and make sure it's installed.

Then plug it into your machine and controller, open up the software, THEN power your controller on.
NO this is wrong.

You must power up the controller (green or red LED is okay) and then open the program. If you open the program with the cable installed and the control LED not lit up you will get the 'cant find controller' error.
scottyb is offline   Reply With Quote