View Single Post
Old 10-17-2011, 08:57 PM   #2
madoc1
no clue
 
madoc1's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
Default Re: Removing Rear End from Frame

that's about it. put the cart on stands, pull off the brake lines and remove all the cables. be sure to label each one. also label the motor. 1,2,3,4 will work. then put a jack under the rear and pull the bolts holding each side to the springs. you should use a strap or belt to keep the motor from rotating down when you are lowering it. this is all general, depending where you have a lift, etc.
madoc1 is offline   Reply With Quote