View Single Post
Old 10-11-2019, 07:06 PM   #8
Mustang4249
Not Yet Wild
 
Join Date: Oct 2019
Posts: 8
Default Re: 2010 Precedent not doing anything!

Quote:
Originally Posted by NoleFan4Ever View Post
That sounds better if the resistor is not getting hot now.

You should have continuity between F1/F2, A1/A2, but not either F to either A and not any to the case.

If you rotate the motor you will probably get it back on the A1/A2.

Presuming your controller is correct for your cart, then unplug the 6-pin connector at the OBC. On the carts' side harness (not the OBC side), take a paperclip and install it as a jumper between the Blue wire and the White wire. This will bypass the lockout circuit of the OBC.

Report back what happens.
Did like u said and jumped the blue and white and it kicked it and worked. Guess now I just need to buy a bypass kit.
Mustang4249 is offline   Reply With Quote