Thread: Primer / Sealer
View Single Post
Old 11-26-2012, 09:14 AM   #27
master66
Gone Wild
 
master66's Avatar
E-Z-GO
 
Join Date: May 2009
Location: Marysville Wa
Posts: 696
Default Re: Primer / Sealer

Ah it's all good we have all had our share of runs I am sure. You can get the nib kit if you want but be very carefull in the area where the body meets the fender flare. When you get the large droplets removed I wrap 1000 or 1500 around a small hard block like 1" x 1" the hard block allows you to stay on top of the sag. When you think you have it down enough go back with 2000 grit and a regular foam backed wet sanding pad. Pour water over it to create a shine to see if you have removed the whole sag. If so then wet sand and buff, if not keep sanding BUT BE PATIENT because if you blow through to the color then you have created a whole other problem.
master66 is offline   Reply With Quote