Buggies Gone Wild Golf Cart Forum - View Single Post - V glide function seems reversed on Curtis 1205-117

russ810 · 11-12-2018, 08:03 PM

Thanks very much Sergio, I’m very close. The three wire method is closest to working properly but in forward the motor doesn’t engage until the wiper hits the seventh post. It runs slowly there but Then quickly speeds up on the 8th post and full throttle is dead. All the posts are clean and contact seems to be good.

Worth mentioning I had the the wires backwards at the throttle pins initially and essentially the same thing happened except it didn’t start until the 8th post and the 9th post was full throttle. The 2 wire method gave crazy results

Any other thoughts?

11-12-2018, 08:03 PM	#5
russ810 Not Yet Wild Join Date: Mar 2018 Posts: 13	Re: V glide function seems reversed on Curtis 1205-117 Thanks very much Sergio, I’m very close. The three wire method is closest to working properly but in forward the motor doesn’t engage until the wiper hits the seventh post. It runs slowly there but Then quickly speeds up on the 8th post and full throttle is dead. All the posts are clean and contact seems to be good. Worth mentioning I had the the wires backwards at the throttle pins initially and essentially the same thing happened except it didn’t start until the 8th post and the 9th post was full throttle. The 2 wire method gave crazy results Any other thoughts?
russ810 Not Yet Wild Join Date: Mar 2018 Posts: 13