View Single Post
Old 07-03-2018, 05:48 PM   #6
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
Default Re: Welded Solenoid?

That's right, no diode on the resistor coil drive system and not need for a 48v solenoid in a 36v system.
Check to see if the pedal is coming all the way up and the wiper in the V-glide is going to it's off place...... if the copper pads and wiper contact get burnt and pitted (normal wear) they will hang up and not return to zero resulting in the solenoid being left engaged and the cart trying to go a bit. Hope this helps
scottyb is offline   Reply With Quote