[brunson67]

In the process of installing a new Super Heavy duty solenoid, 1997 Club Car 48 volt. Just want to make sure I have the wiring correct. Does below look correct?

Positive Large terminal post
 Battery cable goes from positive side of solenoid to positive #1 battery
 Small green to key switch
 Small red wire from OBC
Positive Small terminal post
 Small red wire to controller #1 spade connector
 Small white/black to micro switch F/R switch
Negative Large terminal post
 Large yellow cable to controller B+
Negative Small terminal post
 Small yellow wire to #3 controller spade connector