View Single Post
Old 08-13-2019, 03:33 PM   #8
webn237
Gone Wild
 
webn237's Avatar
Yamaha
 
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
Default Re: G2 Front Hydraulic Brakes

Quote:
Originally Posted by Shepard View Post
Yes I can put brakes on the rear of a G2. I've done all the resourcing of parts and have 2 G2's setup with 4 wheel disc brakes with parking brake. The calipers are WilWood bought from Ebay, I bought a replacement hardware kit for a G2 for the wheel studs and nuts and bolts. I made my own caliper supports, the brake lines were made from bulk hose and hose ends. The master cylinder is 2 sided like a car. I haven't found a need for a differential valve as the master cylinder is matched for use in this application. On my first build I put the master cylinder under the floor --- lower then the calipers mounted on the wheels. I had to install 2 2lb residual pressure valves inline on the brake lines. This way I didn't lose my brakes.
The build I am doing has a gas G2 rear end and a G16 chassis with the front suspension. Im hoping to put in a v-twin or vc 625cc engine. So i want some good stopping power

Sent from my SM-G935R4 using Tapatalk
webn237 is offline   Reply With Quote