View Single Post
Old 07-26-2019, 06:51 AM   #10
Mblaze001
Not Yet Wild
 
Join Date: Jul 2019
Location: DE
Posts: 18
Default Re: Solenoid question

Quote:
Originally Posted by scottyb View Post
The pre charge resistor goes on the big studs. Use 10w 250-275 ohms Ω for 36v.
The suppression diode goes on the small terminals. Use 1000v 1-3 amp for 36v.
So what size resistor and diode would I need for a 48 volt setup?

Still trying to figure everything out for a rebuild.
Mblaze001 is offline   Reply With Quote