View Single Post
Old 05-19-2023, 11:31 PM   #11
cowden.chad@principal.com
Not Yet Wild
 
Join Date: May 2023
Posts: 1
Default Re: Par Car rear seat

Quote:
Originally Posted by HookSet View Post
Just to share for anyone else looking to do this. I ended up just getting the cheapest GTW seat I could find, happened to be for a drive2 (clearance from buggiesunlimited.com). I modified it very slightly and it is on the cart just fine. It bolts right to the roof supports by drilling a couple holes, rests on the rear clamshell and I will modify the floor brackets at some point but it's pretty stable. I also had to cut about 3-4 inches off the legs the foot platform bolts too to clear the bumber and modify how the rear seat back attached to the cross bar, but this was all started and finished within a 2 hour period, so not too bad. From what I can tell you could do this with any of the GTW seat kits pretty easy, I recommend the aluminum for weight savings though.
do you have any pics? thinking about doing this for my 1988 Columbia Par Car. Any other advice?
cowden.chad@principal.com is offline   Reply With Quote