Quote:
Originally Posted by Nubs
08 Club car, new Speed sensor, MCOR pedal assembly, solenoid, high speed magnet and key switch. The cart will run fine for a couple days, then will die. Sometimes it will come right back on, sometimes an hour or so later. have had the buzzer sound while running good and then cut out. When it dies, no forward movement, and switching to reverse there is no buzzer or movement. Still show voltage at the volt meter. Sometimes it comes back to working, but only 8 mph, then sometimes back to 100%. I have been told probably a controller issue, but hunting info? Desperate for help.
|
There is caused by the OBC putting the Controller on lockout mode.
You need to connect the Blue and White wires together at the OBC 6-pin connector on the cart harness side, that will provide a constant signal to the Controller so it does not go into lockout mode.