View Single Post
Old 06-04-2018, 03:31 PM   #9
biphase
Gone Wild
 
biphase's Avatar
 
Join Date: Jan 2009
Location: Ocala, FL
Posts: 384
Default Re: TXT - PDS Odd problem

You are probably hearing the controller beeping the self-test fault code we discussed previously. I am assuming that your controller is still in the self-test mode. To be sure, put the tow/run switch back in tow, turn the key off and put the cart in neutral. Next, return the tow/run switch to run and toggle the F/R switch from neutral to reverse five times (five beeps) wait a few seconds and hear 1 beep confirmation that you are in self-test. Next, turn the key on and put the cart in FWD and step on the throttle. At this point you should hear the controller beep a code. A 1-1 code is controller failure, a 2-2 code is overvoltage which is not likely since you measure about 38 volts.
biphase is offline   Reply With Quote