View Single Post
Old 08-28-2013, 10:02 PM   #2
fabricatorjay
Getting Wild
 
fabricatorjay's Avatar
Club Car
 
Join Date: Jul 2012
Location: carleton michigan
Posts: 101
Default Re: Newbe whats a clone

a clone motor is a clone of a Honda gx390 13 hp motor,home depo sells one and harbor freight sells one,im doing one now on a 91 cc ds I lifted mine about 6'' and raised the motor up 4'' to clear the factory throttle box,i had to lower the throttle box down to clear the air cleaner that comes with the clone motor but it was pretty easy,you can fit one in without lifting the cart but I don't think you can still use the factory throttle box,i call it a throttle box because it has the throttle cable bell crank in it it also has the voltage regulator and solenoid in it im making a bracket for the starter/generater tomarrow,if you cant get the body off your carryall just take the rear swingarm/motor cradle out and work on it like that,you have to raise the motor up a few inches to clear the trans.hope this helped.............jay
fabricatorjay is offline   Reply With Quote