Buggies Gone Wild Golf Cart Forum - View Single Post

thinfire · 08-09-2016, 06:43 PM

You are correct, there is no thread left on the tie rods.
I did however check dimensions both front and back and toed-in 1/8" in front after the lift, but used up almost all of the threads. The cart rode well following that adjustment.
After moving the axle forward the angle of the rods changed from a angle (outside ends pointing back) to a nearly straight across configuration. this actually elongated the distance between the outside ends. This additional length toed in the wheels considerably and without any threads left to bring it back.
I looked up ST Spindles and didn't find anything. Could you clarify them a bit for me?
Thanks for taking a interest in my problem.
Ken

08-09-2016, 06:43 PM	#5
thinfire Not Yet Wild Join Date: Aug 2016 Location: Cleveland, Ohio Posts: 19	Re: Front Lift Steering Problems You are correct, there is no thread left on the tie rods. I did however check dimensions both front and back and toed-in 1/8" in front after the lift, but used up almost all of the threads. The cart rode well following that adjustment. After moving the axle forward the angle of the rods changed from a angle (outside ends pointing back) to a nearly straight across configuration. this actually elongated the distance between the outside ends. This additional length toed in the wheels considerably and without any threads left to bring it back. I looked up ST Spindles and didn't find anything. Could you clarify them a bit for me? Thanks for taking a interest in my problem. Ken