Hello all!! I am finally putting on my new body and my light/horn/turn signal kit. I also installed brand new T105 batteries. My cart is a 1990 DS. It has not ever had a charge indicator on it, so I decided to put on on while I do all this other work to it.
I have an issue though. My 3 prong digital indicator will not work when connected to the key switch the way the instruction indicate. I have it wired correctly, but the only way to get anything is to wire the #1 & #4 as constant hot and #2 negative.
I did some searching and found someone with my same issue (quoted his solution below). He found a solution and asked if it would be ok, but I didn't see any replies as to whether it would hurt anything or not or give an accurate reading. Any advice? Thanks!
Quote:
Originally Posted by ruger.john
Man something freaky is going on with the cart.
Well I try to do what you said and it doesn't light up the LED. However, if I take the positive from the #1 battery to the #1 post, the #2 post to the blue wire on the key switch and ground #4, it works. It turns on and off with the key.
I'm just not sure if this will cause any damage? Any ideas? i don't mind it being this way as long as I won't fry anything. The cart still drives and moves and everything so maybe its ok. I just would like to be certain though.
Thanks for all the help :)
|