View Single Post
Old 04-30-2014, 10:05 AM   #5
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: 2010 EZGO not running/running very slowly

Quote:
Originally Posted by bconne1 View Post
So the four beeps are good? I'm not sure what Freedom Mode is.

The batteries are Energizer GC2s - 107 minutes at 7.5 amps.

The charger is an EZGO PowerWise Qe.

After a full charge (I'll have to check them after the 12 hour rest in the morning) but each battery is between 6.5-6.6 VDC. It's raining like a champ now so I didn't check the solenoid.
A PDS controller has four modes of operation that can be selected by installing J2 plugs with different pins jumpered. Attached are drawing showing the various plugs and the various modes

Energizer has two grades of GC2 batteries, 232AH and 208AH. Apparently you have the economy grade (208AH -- 107 Minutes at 75A)
Those should work okay, just shorter run0time and shorter lifespan.

A Powerwise will charge a battery pack adequately when the work, but need to the pack voltage and individual battery voltages after they have sit for 12 hours to know if it is working.
JohnnieB is offline   Reply With Quote