Re: 1/2 speed not working on DS 99 with 1205-203 Curtis
Unless that controller offers the optional reduced reverse input quick connector T4, which I think only the "M" model does, it is a little tricky to use a micro switch to change a 5k-0Ω throttle into a 5k-2.5kΩ throttle.
I drew something on a piece of paper before (just for fun) for another member but I never posted since he had the correct T4 input in his Controller.
If Your controller does not have 4 quick terminals on the panel, the T4 is on the opposite side of the panel as the 3 for KSI and throttle, I will look for the sketch or do a new one, You will need to get a 2.5KΩ as well as use the 5.1kΩ resistor you already have to change the throttle.
|