[anziosaint]

I have a new old stock alltrax 400 amp controller for an EZGO. Here's the deal. I purchased a parts lot that had a bunch of stuff I wanted to build a couple of cars. I acquired some parts in the lot that I knew I would never use but have been holding on to them for too long and its time to try to recoup some of my money. This controller has never been used but has some scuffs and what not from being moved around and sitting on the shelf, work bench, or wherever else it got placed. Here are the specs:

Alltrax NPX4844EZ Motor Controller
- Fuse Included

Features include:
•Alltrax NPX 4844EZ
•E-Z-Go '95 & newer
•Medalist & TXT with ITS throttle
•400 Amps
•24-48 Voltage Range

Manufacturer's website Alltrax Inc
•Integrated anodized heat-sink with multi bolt pattern for flexibility

•Fully encapsulated epoxy fill - environmentally rugged design

•Available in 300 & 400 amp versions

•Advanced MOSFET power transistor design for excellent efficiency
and power transfer

•1/2 Speed reverse option and "Plug Brake" options available
•Type: DC "SERIES WOUND" motor controller
• Under-voltage cutback: adjustable ◦16-30 VDC, preset to 12 volts under your battery pack voltage

• Over-voltage shutdown: adjustable
◦30-60 VDC (48V models) (60VDC MAX)


•Operating Frequency: 18kHz

•Control voltage range; Key, Throttle and Reverse inputs:

•Reverse Horn Output: 50mA sink max

•Standby Current (Powered Up): < 35mA

•Throttle Input:
◦ITS (inductive)

◦Resistive 0-5K ohm (+/-10%)

◦5K-0 3 wire Club Car (+/-10%)


•Operating Temperature: -25C to 75C, 95C shutdown
•Ratings

NPX Models 4834 4844
Current Limit 300A 400A
2 Min. Rating 300A 400A
5 Min Rating 200A 300A

I will ship it to your door for $185.00