Buggies Gone Wild Golf Cart Forum - View Single Post - Battery and buzzer stay on after light kit install

yawood · 08-18-2018, 12:07 AM

Your reducer 48V should get its power from the main terminals on the pack (if you do NOT have an ERIC charger (i.e. you have a PowerDrive charger and an OBC) the negative will be connected to the black cable with the yellow bullet connector near the main pack -ve). If you have an ERIC charger then ignore that.

Your lights should connect to the +12V and -12V from the reducer. Make sure that the negative from the lights does not just go back to the cart negative.

Think of the reducer as being a 12V battery. All 12V connections (+ve and -ve) should go just to it and there is a complete separation of the 12V system and the 48V system.

08-18-2018, 12:07 AM	#3
yawood Gone Wild Join Date: Jan 2017 Location: Queensland Australia Posts: 1,332	Re: Battery and buzzer stay on after light kit install Your reducer 48V should get its power from the main terminals on the pack (if you do NOT have an ERIC charger (i.e. you have a PowerDrive charger and an OBC) the negative will be connected to the black cable with the yellow bullet connector near the main pack -ve). If you have an ERIC charger then ignore that. Your lights should connect to the +12V and -12V from the reducer. Make sure that the negative from the lights does not just go back to the cart negative. Think of the reducer as being a 12V battery. All 12V connections (+ve and -ve) should go just to it and there is a complete separation of the 12V system and the 48V system.