Buggies Gone Wild Golf Cart Forum - View Single Post

Brad · 08-24-2010, 04:46 PM

I made my mount out of 1 1/2 angle and some plate.Mounted it on the original mount where i could use the existing slotted holes for fore and aft adjustmet and slotted the top mount holes for side to side.Just kinda eyeballed the alignment by understanding which clutch moved which way then layed a straightedge off the driven to the drive and tightened everything up and it works great.Maybe I just got lucky.Just go for it,us southern boys usually can figure it out...

08-24-2010, 04:46 PM	#9
Brad Not Yet Wild Join Date: Mar 2008 Location: Tennessee Posts: 20	Re: distance between drive clutch and motor I made my mount out of 1 1/2 angle and some plate.Mounted it on the original mount where i could use the existing slotted holes for fore and aft adjustmet and slotted the top mount holes for side to side.Just kinda eyeballed the alignment by understanding which clutch moved which way then layed a straightedge off the driven to the drive and tightened everything up and it works great.Maybe I just got lucky.Just go for it,us southern boys usually can figure it out...