View Single Post
Old 09-14-2009, 11:44 AM   #5
jauguston
Gone Wild
E-Z-GO
 
Join Date: Aug 2009
Location: Bellingham,WA
Posts: 300
Default Re: Brake Pedal Assembly

Two microswitches with the metal spring tangs will do it. Mount one that is contacted when the brake pedal is in the rested position. Run a fused power source to the common terminal and a wire to the NC terminal so that wire becomes hot when you depress the pedal. Mount another switch that is contacted by the parking brake linkage. Run the wire from the first switch to the common on the second switch. Connect a wire to the NC terminal and run it to the brake light. The first switch will sense the brake pedal movement and the second switch will open the circuit when the park brake is on.

Jim
jauguston is offline   Reply With Quote