Thread: clone exhaust
View Single Post
Old 11-15-2014, 10:37 PM   #3
raydhd
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
Default Re: clone exhaust

On my unlifted G 14 with full body you really can't see anything on this swap.There is a good picture on the Ebay add selling the remaining 9 mufflers.All I did was cut about 6 inches off the vegascarts header and welded on the hushpower 7501 adapter. Then bolted the muffler on the adapter and clamped the muffler to the engine cradle.I put 6 inch long bolts with 3.5 inch pipe spacers to move back the sway bar to clear the new muffler.It added a lot of low end torque and drove fine with the stock vegascarts carb.I have 4.80 x 12 trailer tires in the back.The muffler would be really low with stock tires.I hope this all helps.The cart may be quieter than with the stock G14 engine and replacement exhaust.
raydhd is offline   Reply With Quote