Quote:
Originally Posted by gmorrison
When he says the hole size , it will (may not fit through) the opening in the OBC.
Get a small piece and test first.
2 Gauge is overkill unless you are getting ready to do something extreme or you already
have a supply as you stated.
Also make sure they are flexable enough to shape.
|
Actually I was reffering to the hole in a 2 guage lug being to big for a battery terminal or motor terminal. Its like putting a washer for a 3/4 inch bolt on a 1/4-20 bolt. You end up with part of the lug not even covered by the nut. You have a loose and sloppy fit which will hurt you in the long run. "IF" you can find 2 guage lugs with a 5/16 hole thats great but the point is 2 guage cable is not even remotely needed for a stock cart, even most others. Extreme electrics is a whole other deal.