Quote:
Originally Posted by ksmith247
36 volt E-Z-Go 2005 TXT (I think)
So I had some corrosion issues and my wife picked up a set of 4 ga battery cables today. I installed them and the batteries are now charging.
There are two cables (passenger side) that leave the batteries and go to what I guess is the motor. One of these cables is breaking and needs replacing. I started to take off the cover with the two hex head screws at the top but soon realized that there are two screws at the bottom too! How in the world are you supposed to get to these?
AARGH!
Any advice is appreciated.
|
1/4" drive 3/8" socket works best with a 9" or so extension. Be careful not to break the wires on the tow/run switch (if you have a tow/run switch)