View Single Post
Old 09-13-2014, 09:36 AM   #4
BrewCityMusic
Hammer Down !!!!
 
BrewCityMusic's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
Default Re: lift compatible with carryall front brakes

Prob (at least IMHO) your best bet ... I was being a bit *nice* above when I described the abuse that the carts get around here, LOL, so I can say with confidence that if *I* haven't broken a Jakes Spindle lift, the activities You described most assuredly wont!

You may want to check when You order though, it's possible You may need longer cables for the front brakes. I'm not sure how the CC lifts are set up, but on the EZGO's they not only drop the spindles by 6" but also relocate them slightly forward (about 2") - that translates into a substantial difference when you factor in the turning radius, etc of the wheels and hubs. It's just a thought, but probably worth the few minutes to ask before diving into a project only to find out You need a bunch more stuff You hadn't counted on ...
BrewCityMusic is offline   Reply With Quote