Buggies Gone Wild Golf Cart Forum - View Single Post

tonyton · 06-20-2009, 06:54 PM

I pulled my ezgo clutch with a 2 inch fine thread 3/4 bolt and about a 5 inch 5/8rod. Put the rod in the clutch hole , screwed in the bolt and popped the clutch off. This cost me 4.50 at the local hardware store, so if in a bind and don't have access to the 30 plus dollar puller , hit the hardware store
Butch

This is a quote from "EZ GO Gas Tech"... on the home page. Verify the model before you go spend your money. There's more info there...."Removing an EZ GO clutch" Hope that helps!

06-20-2009, 06:54 PM	#6
tonyton Gone Wild Join Date: Jan 2009 Location: Alabama Posts: 2,120	Re: Installing new timing belt I pulled my ezgo clutch with a 2 inch fine thread 3/4 bolt and about a 5 inch 5/8rod. Put the rod in the clutch hole , screwed in the bolt and popped the clutch off. This cost me 4.50 at the local hardware store, so if in a bind and don't have access to the 30 plus dollar puller , hit the hardware store Butch This is a quote from "EZ GO Gas Tech"... on the home page. Verify the model before you go spend your money. There's more info there...."Removing an EZ GO clutch" Hope that helps!