View Single Post
Old 03-01-2023, 01:42 AM   #8
Cartmaster
British born Nincompoop
 
Cartmaster's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,456
Default Re: Install new Alltrax 48300 and Batteries

Quote:
Originally Posted by SamanthaP0930 View Post
Sorry if this seems silly but the red white and red black (other half of the white connector to the solenoid, it seems like they appear into the connector but not the same from the front of the cart?
If you mean the red white changes to red yellow, then according to the diagram that is correct.

With your large cable between the controller and solenoid, if it sets better on the big solenoid post further away from the controller rather than the closest one, I am pretty sure you can place it and the large battery cable on either opposite posts on the solenoid as it is just a switch as far as i can see, and just make sure the small red wire feeding the fuse, goes on the same post as the battery cable, not the one to the controller. Does that make sense?

Hopefully someone with more knowledge will confirm because as you know, this is not my area of expertise Lol.
Cartmaster is offline   Reply With Quote