i am moding a clubcar vilager 6 to a gas cart as the cart sits now its a bare frame as i have to replace the front 4 feet of the frame about a foot behind the dash have a used freame to take the parts off with a bent rear end the cart will be 5 speed so i was thinking about puting the swich rich in the shifter knob or on the shifter shaft or mouned in the dash as for mounting the acuator i could mave to make someing so it was mounted right to the axle houseing so it moved witht the axle as for power oi will have 2 12v volt deep cycles onbored both crargeing off the motor
sorry for the long post
Quote:
Originally Posted by crash test dummy
interesting idea .. never seen one used ... you would need to measure your own f/r switch and adapt it .. do you know where you will mount it and how you will power it ? also where would mount the actuator switch ?
|