View Single Post
Old 12-08-2022, 12:31 AM   #18
trig123
Vintage tech
E-Z-GO
 
Join Date: Sep 2009
Location: South
Posts: 3,210
Default Re: 2003 ezgo body and cowl question

For now I used this one switch. Its a heavy duty push pull I found in my shop and I used the knob I had also found. Drilled 3/8th hole in key switch plate and put it there. It works.

I wired it straight to my battery and used a 15amp fuse. Still want the LED for at least the headlights.

Found this one which looks just like the Halogen
https://www.amazon.com/LEAPGOMAX-Car...s%2C99&sr=8-33
May have to buy the entire assembly to get just the front.

Here is my switch now.

Also looking at getting a 4 inch lift next and then tires and wheels later.

I already have the 28 degree clutch installed and this cart will pull a mountain. I also installed four leaf springs last year. I rebuilt the engine last year and it runs great.
I will get a picture uploaded here soon of what it looks like now .
Attached Images
File Type: jpg Light switch for ezgo project of mine.jpg (155.2 KB, 0 views)
trig123 is offline   Reply With Quote