Re: TXT48 or PDS F&R switch update with digital battery meter
Here I have stripped back the last F&R wire (gray) and the new 18g meter wire about 1/2 to 5/8 inch. I have slipped a 1.25 inch piece of small shrink wrap on the meter wire. I have folded back and twisted each bare wire so they are attached as a chain link. I have heated the shrink wrap over the twisted wire ends and applied a liberal amount of synthetic grease to the wire and into the loom, to get things started.
Pull the gray wire out and the new meter wire in. Connect the (-) meter wire to the meter black and the main negative.
|