View Single Post
Old 04-13-2022, 12:16 PM   #28
Jhammer
Not Yet Wild
 
Join Date: Mar 2022
Posts: 43
Default Re: 2008 Tomberlin Emerge hall effect senor issue

Okay so thank you for your well wishes for my family everything is great. So here's the current state of things. I swapped the wires on the Hall effect sensor and adjusted the plunger so that the plunger is now flush with the back of the hall effect sensor when the pedal is pressed all the way down. Unfortunately no the movement of the motor so we are still dead in the water. I went ahead and tested the motor this last weekend and it turned under 12volt power just fine no noises just quiet rotation. I have not checked pin 17 on the controller harness yet to see if I'm still getting 48v when the pedal is pressed all the way down instead of 0 volts. I feel like the only thing that can be wrong is the controller is bad. I have tested it with the diagnostic checklist and only pin 17 came back as an error I imagine a failure of a controller would be vast not just on pin imn my opionon but yeah here we are.
Jhammer is offline   Reply With Quote