Quote:
Originally Posted by scottyb
Very nice looking pack ! Not even sure this applies? but-
Have you contacted your manufacture to inquire if extending the temp sensor wires will effect the sensor performance ? All of the research and inquiries I did on motor temp sensors said the sensor and the read out were calibrated with the length of the lead and that adding to the length would ill effect the reading.
|
The stock leads were like an inch.... Zeva said just extend them, but I see your point. I’ll have to follow up about it. There is also the possibility that they don’t need to be 100% accurate in this application.
Sent from my iPhone using Tapatalk