Thanks Master! I have some immediate paint questions, but not about the golf cart - yet.
So this kid got the bug last year, so I got him into a Jr Dragster at the end of the Summer for his licensing passes. He did great, and is definitely hooked!
All was well until several weeks later when Danny's Jr came loose in the trailer on the way home from Englishtown, and busted the nose all up. �� So, I reinforced the underside of the body, and then epoxied the topside, finishing it off with some filler. This is a very thin Fiberglas body, with what appears to be rattle can gray primer on it.
I'd like to paint this body a very bright white with PPG's Shop Line products.
- Do I need to remove all of the gray primer? It's been on there for at least 8 years.
- Do I need to mix the PPG differently due to painting Fiberglas?
- Should I spray thin coats because of the flex in the body?
- I'm assuming I should spray a DP white seal coat?
- Can I just spray the sealer over the sanded down body, or do I need to put high build on it?
