Buggies Gone Wild Golf Cart Forum - View Single Post

Flintrock · 12-03-2008, 09:54 PM

http://www.buggiesgonewild.com/gas-y...loud-worn.html
hope the link works, first time
Or search on author bramr1
Or, short version courtesy of smallblock450sl, but entire thread is a better education:

Don't forger to "pre load" the secondary when reinstalling. One of the spring goes into hole #3 (on the spring seat) and "B" (on the floating flange), the "turn the floating flange" till the "peaks" goes past the secondary ramp shoes and push it in. (there is a special holder tool) we use to hold it in preload till you get the plastic washer and woodruff key in place. Then the fixed sheave,washer and nut. Tighten with an impact and regrease it......Your are good to go. Hope this helps. Later Dave"

12-03-2008, 09:54 PM	#7
Flintrock Raised by coyotes Join Date: Nov 2008 Location: Central Texas Posts: 5,658	Re: 91 g2 secondary clutch spring http://www.buggiesgonewild.com/gas-y...loud-worn.html hope the link works, first time Or search on author bramr1 Or, short version courtesy of smallblock450sl, but entire thread is a better education: Don't forger to "pre load" the secondary when reinstalling. One of the spring goes into hole #3 (on the spring seat) and "B" (on the floating flange), the "turn the floating flange" till the "peaks" goes past the secondary ramp shoes and push it in. (there is a special holder tool) we use to hold it in preload till you get the plastic washer and woodruff key in place. Then the fixed sheave,washer and nut. Tighten with an impact and regrease it......Your are good to go. Hope this helps. Later Dave"